Deck Installation Azimuth Thruster Marine Propellers
The rudder propeller is one series of our products.
Marine Azimuth Thruster made by us has been approved by the China Classification Society and other international Classification Societies. And the products have been successfully installed, used and served on the ships. They are sailing in oceanic area of home and abroad. Rudder propeller is today used for all types and size of ships. We can provide with a series of specifications of Rudder propeller.
Marine Azimuth Thruster can be freely steered through 360 degrees around the stem. Therefore the Rudder propeller is a combined propulsion and steering unit, so that the full thruster is available in any direction for the ship.
If the prime engine is electric or hydraulic motor, the upper gearbox can be eliminated.
The electric or hydraulic motor can be vertically mounted on the fixed flange and the power will be transmitted through a bevel gear in lower gearbox on to the propeller(L-drive).
The rudder propeller can be operated by mechanical, hydraulic or electric-hydraulic unit, and can be in active service as main propulsion, auxiliary propulsion and dynamic positioning of the ship, which are usually used in tugs, puch boats, ferry boats and barges etc.
Now CQ Gathering is developing higher power RP to satisfy requirements from market.
There are three installation types: Transom installation, Well installation, Deck installation.
Well Installation Rudder Propeller
The well installation is especially for tugs, ferries, well station, floating dock and survey ships.
Our rudder propeller is mounted in the well. The stem length varieswith the requirement of the application.
The top mounting plate of the well should, if at all possible, be above the waterline so that the Rudder Propeller can be installed and removed when the ship is floating.
Well installation varies with the distance between the Rudder Propeller and the diesel engine. When the engine room is very small, the Rudder Propeller can be near to the diesel engine and suitable for application in long-range transmission between diesel engine and rudder propeller.
Deck Installation Rudder Propeller
The deck installation is a complete propulsion package. It is a reliable and compact propulsion plant. The chassis carries the totally enclosed propulsion system. The power of the diesel engine is transmitted to the rudder propeller through an elastic coupling, a hydaulic cluth and a universal shaft. The chassis daily fuel tank and so on. Installation is fast and simple because they are essentially self-con-rained. Only to obtain thrust. The deck installation unit merely has to be mounted and bolted onto a foundation of deck. Rudder propeller is mounted at the rear chassis.
Transom Installation Rudder Propeller
Transom installation is one of the three installation types. It is used for ships and vessels whose space of engine room are smaller, such as floating cranes, mounting plate with sealing is fixed on the plate. That is, the upper of the Rudder propeller is fixed on the pinaxis, and the lower is clamped on the puching ring. When rleasing the thruster bearing, the propeller can easily be elevated backwards.
Elastic suspension for special Sound Proofing is available for this mode of installation.
Specification of Marine Azimuth Thruster
| Input Power Kw/HP |
45/61 |
100/135 |
210/285 |
300/400 |
255/347 |
350/476 |
480/650 |
490/666 |
| Max Input Torque N.m |
200 |
420 |
850 |
1675 |
2500 |
2050 |
2800 |
5200 |
| Max Imput Speed r/min |
2300 |
2500 |
2350 |
2000 |
1000 |
1800 |
1800 |
1000 |
| Reduction Ratio |
1.93 |
2.5 |
2.68 |
3.46 |
2.37 |
3.34 |
3.96 |
2.2 |
| Propeller Dia.mm |
Max |
500 |
822 |
950 |
1150 |
1150 |
1350 |
1550 |
1550 |
| Min |
|
|
700 |
900 |
|
1100 |
1250 |
|
| PAL Length mm |
Max |
2250 |
2800 |
2800 |
4250 |
4400 |
4750 |
4750 |
4750 |
| Min |
350 |
875 |
980 |
1400 |
1400 |
1750 |
1750 |
2000 |
| Weight KG |
65 |
190 |
300 |
1370 |
|
2000 |
2100 |
3580 |
| PAL per 100mm extension kg |
8 |
9 |
20.4 |
40 |
40 |
40 |
40 |
40 |
| PAL The length between the center line of transmission flange and the center line of the propeller |
| Input Power Kw/HP |
100/135 |
210/285 |
260/354 |
340/462 |
350/476 |
480/650 |
580/783 |
620/843 |
| Max Input Torque N.m |
450 |
850 |
1380 |
1800 |
2260 |
2800 |
3070 |
3300 |
| Max Imput Speed r/min |
2500 |
2350 |
2000 |
1800 |
1800 |
1800 |
1800 |
1800 |
| Reduction Ratio |
2.5 |
2.68 |
3.01 |
3.46 |
3.34 |
3.96 |
3.718 |
4.04 |
| Propeller Dia.mm |
Max |
800 |
950 |
1100 |
1150 |
1350 |
1550 |
1550 |
1500 |
| Min |
500 |
700 |
9000 |
900 |
1100 |
1250 |
1250 |
1300 |
| PAL Length mm |
Max |
2800 |
2800 |
4250 |
4400 |
4750 |
4750 |
5000 |
5000 |
| Min |
875 |
980 |
1100 |
1100 |
1750 |
1750 |
1700 |
1700 |
| Weight KG |
190 |
400 |
1200 |
1450 |
2000 |
2100 |
2500 |
2800 |
| PAL per 100mm extension kg |
9 |
20.4 |
20.7 |
40 |
40 |
40 |
45 |
45 |
| PAL The length between the center line of transmission flange and the center line of the propeller |
The final Marine Azimuth Thruster will be made as per the real condition of the vessel.
Other type of Marine Thruster , Propellers
Please contact us talk about details if you are interested in Marine Azimuth Thruster or any types of Propulsion System.
Audited Supplier 
){kind=link}
){kind=link}