SOLID Waste Incinerator Medical Waste Burning Machine
Description of Solid Waste Incinerator :
The Gathering marine incinerator, which is designed for on board incineration of ship's waste oil and solid, it mainly consists of four parts:
A. Combustion chamber with diesel oil burner, sludge burner, and electric control panel.
B. Flue gas fan
C. Flue gas damper.
D. Sludge tank with circulating pump and heater.
How it works:
The incinerator is mainly based on the principles of pyrolysis and incineration. The garbage first enters the furnace and undergoes pyrolysis under oxygen-deficient or anaerobic conditions, causing organic matter to decompose into combustible gas, tar, carbon black, etc. Subsequently, the flammable gases produced by pyrolysis and incomplete pyrolysis substances enter the combustion area, mix with sufficient oxygen, and undergo full combustion at high temperatures (usually up to 850°C-1200°C), converting harmful substances in the garbage into carbon dioxide, water, and a small amount of ash.
Details of Solid Waste Incinerator:
The incinerator is equipped with single door in front, which are intended for loading
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100° C and incinerator fully stop.
The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and
Operator panel. The electric panel is built according to international standards for marine equipment.
The operator panel which is located at the right side of the control panel has a touch screen and
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.
Main Features of Solid Waste Incinerator
Gasified pyrolysis incineration is used foe burning many kinds of waste.Waste can be burned once everyday by gasified incineration.Gasified incineration ,mixed incineration and burnout treatment ensures low emission standard of dust,dioxin etc.Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.Compact structure and small land occupation.
Detail photos
Technical Parameters of Solid Waste Incinerator
| Item |
Spec. |
| Burning capacity |
10kg~800kg/h |
| Incinerator size |
1.8m*1.15m*3m |
| Volume of incinerator |
Gas room 0.5m³,Secondary burning room 0.3m³,Mixing combustion room 0.04m³ |
| Size of waste inlet hole |
620mm*800mm |
| Chimney |
Height 10m, outer diameter 280mm |
| Air blower |
0.25kw |
| Combustion burner |
0.11kw,fuel consumption 4~10kg/h |
| Re-combustion burner |
0.11kw,fuel consumption 4~10kg/h |
| Running- voltage |
220V/380V |
| Weight |
About 4000kg |
Marine Incienrator is workabale
Audited Supplier 
){kind=link}