Customization: | Available |
---|---|
Application: | Professional Equipment |
Usage: | Repairing and Testing The Performance of The Suit |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
item
|
value
|
Place of Origin
|
China
|
Product Name
|
Thermal Insulation Immersion Suit Testing&Repairing Tools
|
Flash Frequency
|
50-70 times/min
|
MOQ
|
2 Set
|
Certificate
|
CCS/EC
|
OEM
|
Acceptable
|
The Immersion Suit Test Kit is a tool specifically designed for testing thermal suits. It is easy to operate, portable and easy to store.
This test kit is suitable for repairing immersion suits and other common lifesaving suits.
Key Components
Product Details
Packing: Aluminum Suitcase
Testing instructions
Testing Steps
1. Lay the immersion suit on a work table.
2. open the face clamp, make sure the under-part slot of clamp at the zipper position.
3. pull the zipper, make sure the upper-part slot of clamp at the zipper position, and the two parts of clamp completely grip the border of hood, screw the nut tight.
4. let the pressure gauge, valve connector connect to the upper-part clamp separately, connect the manual inflator (or use other air source). Inflate the immersion suit to pressureof 0.7-1.4 kpa.
5. Brush soap water or neutral detergent water along the zipper, or the whole surface of the suit. In this way, bubbles are seen if there are, mark the point where bubble appear, get ready for repairing.
6. Because this kit is a simple testing kit, the up end of zipper & gear position is not completely sealing, a little bubble appear on these place is acceptable.
Certificate: CCS/EC