Marine Fifi-1/4 Fire Fighting System Diesel Water Set Electric Floating Fire Pump

• Customization: Available
• Water Form: DC Spray Gun
• Material: Stainless Steel
• Model NO.: FiFi-1/4
• Pressure Range: Low-Pressure Water Gun
• Jet: Dispersed Jet
• Functional Level: 1/4
• Multiple Use Water Cannon Type: DC Jet Spray
• Customized: Yes
• Feature 1: Low Vibration
• Feature 2: Low Noise
• Feature 3: High Efficiency
• Transport Package: Carton Packaging
• Specification: Min. Capacity of Fire Pump 600 m3/h
• Origin: China

Product Description

Product Description

The main fire pumps installed on ships are located inside the ship's engine room, usually at the bottom platform. They are electrically driven from the main supply of the ship.

It is very common to find them installed near general service pump and ballast pumps. The general service pump lines are interconnected with the fire main and at times are used to provide water to the fire system

Capacity &  Requirements

• Emergency fire pump to be provided in Passenger ships of 1000 grt and above 
• Emergency fire pump to be provided in cargo ships of 2000 grt and above
• The emergency fire pump must be driven by a self-cooled compression ignition engine or by an electric motor powered from an emergency generator
• It must be located outside the machinery space, in a compartment not forming the part of the engine room
• The emergency fire pump must be provided with its independent suction arrangement and the total suction head should not exceed 4.5 meters under all conditions of list or trim
• The emergency fire pump capacity to be at least 25m3/hr delivering two ½ inches bore jet of water having a horizontal throw not less than 40 ft
• If the pump is located above the water level, a priming arrangement must be provided to fill the pump casing with water before starting
• In a motor-driven emergency fire pump, a heating arrangement must be provided which is also supplied from the emergency switchboard power
• For engine driven pump, the fuel tank capacity should be such that the engine can run the pump at its full load for at least 3 hrs
• A separate reserve fuel tank to be provided outside the engine room machinery space
• The prime mover engine should be of manual/ battery/ hydraulic start type which can be started and operated by one man

Product Parameters

      Fire monitor is important fire-fighting equipment for long-distance fire fighting, which is suitable for fire-fighting and rescue ships, fire-fighting vehicles, warehouses and docks, petrochemical enterprises, storage tank areas, airports and other places. Our fire monitor products are designed based on the most advanced hydrodynamics techniques and manufactured according to the most stringent inspection and test requirements, with the technical advantages of "large flow, high cluster, long range" leading in the world.

Fire Monitor

Model	Effective Flow Rate(m^3/h)	Effective Flow Rate(m^3/h)	Rated working presure	Entrance access
1	480-1200	28.8-72	0.8	DN50
2	1200-1500	72-90	0.8	DN50
3	1500-1800	90-108	0.8	DN50
4	1800-2400	108-144	0.8	DN65
5	2400-3000	144-180	0.8	DN80
6	3000-3600	180-216	1	DN80
7	3600-4000	216-240	1	DN80
8	4000-4800	240-288	1	DN100
9	4800-6000	288-360	1.2	DN100
10	6000-7200	360-432	1.2	DN150
11	7200-9000	432-540	1.4	DN150
12	9000-10800	540-648	1.4	DN150
13	10800-18000	648-1080	1.4	DN150
14	18000-26000	1080-1560	1.4	DN200
15	26000-32000	1560-1920	1.4	DN250
16	32000-60000	1920-3600	1.4	DN300
17	60000-80000	3600-4800	1.4	DN400

 

       Marine pumps are mainly used in the drainage system, pipeline pressurization, marine fire fighting, circulating water and other fields. It can also be used for industrial, urban water supply and drainage, farmland, orchard irrigation, with the characteristics of high efficiency, easy maintenance, reliability and durability. Marine fire pumps are installed on ships, offshore platforms, and other water powered working environments. They are used as non power fire pumps, fixed fire extinguishing systems or other fire fighting facilities. They are used as special pumps for transporting liquid or fire extinguishing agents such as water or foam solutions. We design products based on the most advanced design tools such as CFD (Computational Fluid Dynamics) and FEM (finite element analysis). With the support of our engineers' rich experience and a large number of model test data, we can provide customized pump solutions.

Marine Pump

Pump Inlet	Pump Outlet	Flow(m^3/h)	Range(m)	Speed(rpm)	Institutional form
150	125	120-180	120	2950	Vertical electric
200	150	160-400	120-145	2960	End inlet top outlet
250	200	400-720	120-150	1800/1450	End inlet top outlet
250	200	400-900	120-145	1800	Side inlet top outlet
300	250	1000-1800	120-160	1800	End inlet top outlet/Side inlet top outlet Bottom inlet top outlet Side inlet side outlet
350	250	1200-2000	110-150	1800	Ende inlet top outlet
400	350	1500-2800	120-175	1800	Side inlet top outlet Bottom inlet top outlet
450	350	1800-3600	120-165	1300	End inlet top outlet
500	400	2600-4300	120-150	1000	Side inlet top outlet
550	450	3000-4800	120-150	1000	Side inlet side outlet
600	500	3600-6600	120-150	1000	Side inlet top outlet

 

       Marine external fire fighting system is a professional fire fighting and extinguishing system used for external fire fighting of ships, offshore installations, ports, etc., which is mainly installed on fire rescue ships, official ships, port tugs, platform supply ships and other ships. Based on the technical advantages of our company's fire water monitor and pump set, our marine external fire protection system provides five levels of FiFi-1/4,FiFi-1/2,FiFi-I,FiFi-II,FiFi-III. The system has a more compact and stable product structure, a wider flow range and a more concentrated water column range. Combined with the company's independently developed wired / wireless electrical control system, it is a well-known product in the field of marine external fire protection system.

Fi-Fi System

Equipment	The basic requirement for FI-FI System
	FIFI 1/4	FIFI 1/2	FIFI I	FIFI II		FIFI III
Min.Number of Fire Monitor	2	2	2	3	4	4
Min.jet rate of Fire Monitor(m^3/h)	300	600	1200	2400	1800	2400
Min.Number of Fire Pump	1	1	1	2		2
Min.Capacity of Fire Pump (m^3/h)	600	1200	2400	7200		9600
Performance of Fire Monitor	-	-	-	-		-
Minimum height of jet trajectory above water surface (m)			45	70		70
Min.Range(m)			120	150		150
Minimum fuel holding time required for simultaneous and continuous operation of all Fire Monitors (H)	-	-	24	96		96
Fixed Foam System:	-	-	-	-		-
Min.Number of Foam Monitor	-	-	-	-		2
Min.jet rate of Foam Monitor (m3/h)	-	-	-	-		300
Continuous foaming time(min)	-	-	-	-		30
Mobile fire fighting equipment:	-	-	-	-		-
Mobile foam generator	-	-	-	-		-
Min. foam supply rate (m^3/min)	-	-	-	100		100
Continuous foaming time(min)	-	-	-	30		30
Fire hose	-	-	-	-		-
Number of interface /Fire hose hydrant on each side of the ship	-	-	4	8		8
Fireman's equipment	-	-	4	8		8

Installation Instructions

Location description

Detailed Photos

 Marine/Land Fire Fighting Module

FAQ