Cat Pump System 4500gpd Seawater Desalination
|Min. Order (SET)||FOB Price|
|1+||US $15,000 / SET|
Function and service description of Seawater Desalination Plant
-Raw water boosting and pre-treatment system
-Online monitoring device of Reverse Osmosis
-Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter.
-Automatic low speed chemical cleaning and dosing system.
- Spares and special tools with reference to maker's standard
On-site commissioning and conduct available upon demand of customer in China
- World-wide aft-sales service and maintenance upon request
Performance system function of RO Seawater Desalination Plant
1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm
2) Whole system under control and monitoring via PLC
3) Automatic cleaning and back-flushing system equipped for sand filter,
4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention.
5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention.
6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity)
7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention.
8) Potential-free alarm and running indication available for extension.
Technical parameter of RO Seawater Desalination Plant
Raw water: ≤ 35000PPM
Inlet temperature: 5~35° C
PH value of Raw W: 3.0~10.0
Boosting inlet pressure: 0.1~1kg/cm2 (Positive)
Salt content of product water: ≤ 700PPM
Desalination rate: ≥ 98.5%
Product water pressure: ≤ 0.3Mpa
Power supply: 380VAC/50Hz/3φ
Power consumption: 18.5KW(Include boost pump)
Control cabinet: 220VAC
Control voltage: 220VAC
Potential-free extension for running indication and common alarm available.
Motor: IP: IP55
Insulation class: "F"
Outline: L× W× H=2750× 1950× 2200mm
Weight: Dry weight 2500kg
Wet weight 800kg
|Raw water TDS||Less 35000ppm|
|Produced water TDS||less 500ppm or as customer's needs|
|Power||220v/ 380v/ 440v 50//60HZ|
|Output Capacity||As customer's needs|